MAPEI MORTAR GRAY 4 TO 1 55LBS (3/8″ TO 3″)
4 to 1 is a pre-blended mixture of finely graded sand and Portland cement used for thick-bed mortar installations. 4 to 1 flattens and levels an existing substrate before tile and stone installation.
Showing 81–96 of 145 results
-
-
MAPEI NOVOPLAN 2 PLUS 50LBS 1/8″ TO 1″
Novoplan 2 Plus is a high-strength, self-leveling cement-based underlayment and repair mix with quicker curing time, for interior concrete and engineerapproved floors.
-
MAPEI P10 GLASS MORTAR 43lbs
Adesilex P10 is a premium-grade, bright white, multipurpose thin-set mortar formulated with non-sag properties. Adesilex P10 is designed for glass tile, glass mosaic and marble mosaic, and is ideal for light translucent natural stone.
-
MAPEI PLANI PATCH 25 LBS (2hr) (INTERIOR feather ONLY UP TO 1/2″)
Planipatch is an ultra-fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength. When Planipatch is mixed with Planipatch Plus, the Planipatch Plus system can be used as an embossing leveler or as a patch to fill voids over properly prepared vinyl sheet goods, vinyl composition tile (VCT), and cement terrazzo before the…
-
Mapei Planicrete W (1.8 GALLON KIT)..
Planicrete W is tremendously flexible and excellent for installing tile over well-supported and properly prepared steel substrates (such as ship decks, elevators, steel staircases and bank vaults). It is designed for setting most types of tile, including moisture-sensitive tile, natural stone and their agglomerates.
-
MAPEI PLANIPREP AR ADHESIVE REMOVER 5 GAL
Powerful, water-based adhesive remover Designed to remove most latex-based adhesives quickly and easily from the surface of concrete subfloors The first step in preparing a concrete subfloor to receive new floor covering Must be used in conjunction with Planiprep SA concrete scouring agent and Planiprep ET epoxy concrete subfloor treatment
-
MAPEI PLANIPREP SC 10LB (PATCHING-SKIMCOAT DRIES IN 60MIN) FEATHEREDGE TO 1″ INTERIOR ONLY
Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skim coating and patching compound.
-
MAPEI PLANISEAL MSP MOISTURE CONTROL MEMBRANE 4GAL PLASTIC MATERIALS 99% 15LBS EMISION (ALL IN A BUCKET)
Planiseal MSP is a two-coat, high-solids, polymer-based adhesive isolator, sealer, moisture-control membrane, and self-leveling primer. Planiseal MSP protects flooring installations against subfloor moisture and pH in concrete slabs with moisture vapor emission rates (MVERs) up to 15 lbs. (6,80 kg) per ASTM F1896, relative humidity (RH) up to 99% per ASTM F2170 and alkalinity protection…
-
MAPEI PLANISEAL VS EPOXY (PART A & PART B) MOISTURE REDUCTION BARRIER (100 SQ FT PER GL) 2.2GL
Planiseal VS is an alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems with floor coverings. In addition, Planiseal VS expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations.
-
MAPEI PLANITOP 330 FAST 50LBS – PATCHING & LEVELING FLOORS & WALLS
Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching, and leveling mortar for interior and exterior walls, floors, and submerged areas. It can be applied from 1/8″ to 1-1/4″ (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces.
-
Mapei Planitop Basecoat Polymer Modified Cementitious Adhesive
Planitop Basecoat is a high-performance, polymer-modified, Portland-cement-based, pre-blended mortar for non-structural applications. Planitop Basecoat can be used as a base coat for embedding mesh in exterior insulation and finish systems (EIFS) or as a leveling coat on cement-based stucco before the application of an acrylic finish or waterproof coating.
-
MAPEI PLANITOP XS 50LB FAST SETTING
Planitop XS is an extended-working-time variation of Planitop X. Shrinkage-compensated, fiber-reinforced, polymer-modified and containing a corrosion inhibitor, Planitop XS features Planitop X ’s outstanding workability and versatility.
-
MAPEI PRIMER SM FAST 1GL (300 – 350 SQFT)
MAPEI SM Primer Fast is a ready-to-use, fast-drying, quick-tacking, water-based, pressure-sensitive, nonhydrolyzable latex primer for use under MAPEI’s peel-and-stick sheet membranes on residential and commercial indoor or outdoor floors.
-
MAPEI TOPCEM PREMIX 50LBS ACCELERATED CURE (1/4″ TO 4″)
Topcem Premix is an accelerated-cure screed mortar suitable for bonded as well as unbonded applications. Topcem Premix can easily be screeded or sloped, and has the workability and working time of conventional screed mortars.
-
MAPEI TYPE 1 MASTIC 1 Gal HIGH PERFORMANCE (40 SQ FT)
Type 1 is a professional-grade, traditional, nonflammable, acrylic adhesive for setting glazed and unglazed ceramic and porcelain tiles on walls, floors and countertops. This adhesive is used for interior applications only.
-
MAPEI TYPE 1 MASTIC 3.5GL HIGH PERFORMANCE (140 SQ FT)
Type 1 is a professional-grade, traditional, nonflammable, acrylic adhesive for setting glazed and unglazed ceramic and porcelain tiles on walls, floors, and countertops. This adhesive is used for interior applications only.