MAPEI MAPESIL 3D COLOR
Mapesil 3D is a professional-grade, 100%-silicone sealant for use on multiple substrates. This sealant is specifically formulated to offer direct color matches to MAPEI Flexcolor 3D grout.
Showing 225–240 of 364 results
-
-
MAPEI MAPESONIC 2 (04140000) 160 SQ FT ROLL
Mapesonic 2 reduces the transmission of impact sound (such as footsteps and dropped objects) and airborne sound (such as voice and TV) through floors when installed under ceramic tile, stone, vinyl, and wood floorings. It also helps to prevent existing or future in-plane floor cracks (with movement up to 3/8″ or 10 mm wide) from…
-
MAPEI MASTIC KER 909 3.5 GL
Ker 909 is a ready-to-use, nonflammable, high-viscosity, synthetic polymer emulsion-based adhesive. Ker 909 is used for residential and light commercial interior installations of wall tiles up to 8″ x 8″ (20 x 20 cm), and interior residential floor and countertop tiles up to 6″ x 6″ (15 x 15 cm). Ker 909 also has a…
-
MAPEI MODIFIED MORTAR BED 60LBS
Modified Mortar Bed is a pre-blended, cement-based, polymer-modified thick-bed and render mortar that includes a blend of selected aggregates. Rather than requiring the use of a latex additive, it only needs mixing with water to produce a thick bed mortar of exceptional strength.
-
MAPEI MORTAR GRAY 4 TO 1 55LBS (3/8″ TO 3″)
4 to 1 is a pre-blended mixture of finely graded sand and Portland cement used for thick-bed mortar installations. 4 to 1 flattens and levels an existing substrate before tile and stone installation.
-
MAPEI NOVOPLAN 2 PLUS 50LBS 1/8″ TO 1″
Novoplan 2 Plus is a high-strength, self-leveling cement-based underlayment and repair mix with quicker curing time, for interior concrete and engineerapproved floors.
-
MAPEI P10 GLASS MORTAR 43lbs
Adesilex P10 is a premium-grade, bright white, multipurpose thin-set mortar formulated with non-sag properties. Adesilex P10 is designed for glass tile, glass mosaic and marble mosaic, and is ideal for light translucent natural stone.
-
MAPEI PLANI PATCH 25 LBS (2hr) (INTERIOR feather ONLY UP TO 1/2″)
Planipatch is an ultra-fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength. When Planipatch is mixed with Planipatch Plus, the Planipatch Plus system can be used as an embossing leveler or as a patch to fill voids over properly prepared vinyl sheet goods, vinyl composition tile (VCT), and cement terrazzo before the…
-
Mapei Planicrete W (1.8 GALLON KIT)..
Planicrete W is tremendously flexible and excellent for installing tile over well-supported and properly prepared steel substrates (such as ship decks, elevators, steel staircases and bank vaults). It is designed for setting most types of tile, including moisture-sensitive tile, natural stone and their agglomerates.
-
MAPEI PLANIPREP AR ADHESIVE REMOVER 5 GAL
Powerful, water-based adhesive remover Designed to remove most latex-based adhesives quickly and easily from the surface of concrete subfloors The first step in preparing a concrete subfloor to receive new floor covering Must be used in conjunction with Planiprep SA concrete scouring agent and Planiprep ET epoxy concrete subfloor treatment
-
MAPEI PLANIPREP SC 10LB (PATCHING-SKIMCOAT DRIES IN 60MIN) FEATHEREDGE TO 1″ INTERIOR ONLY
Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skim coating and patching compound.
-
MAPEI PLANISEAL MSP MOISTURE CONTROL MEMBRANE 4GAL PLASTIC MATERIALS 99% 15LBS EMISION (ALL IN A BUCKET)
Planiseal MSP is a two-coat, high-solids, polymer-based adhesive isolator, sealer, moisture-control membrane, and self-leveling primer. Planiseal MSP protects flooring installations against subfloor moisture and pH in concrete slabs with moisture vapor emission rates (MVERs) up to 15 lbs. (6,80 kg) per ASTM F1896, relative humidity (RH) up to 99% per ASTM F2170 and alkalinity protection…
-
MAPEI PLANISEAL VS EPOXY (PART A & PART B) MOISTURE REDUCTION BARRIER (100 SQ FT PER GL) 2.2GL
Planiseal VS is an alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems with floor coverings. In addition, Planiseal VS expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations.
-
MAPEI PLANITOP 330 FAST 50LBS – PATCHING & LEVELING FLOORS & WALLS
Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching, and leveling mortar for interior and exterior walls, floors, and submerged areas. It can be applied from 1/8″ to 1-1/4″ (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces.
-
Mapei Planitop Basecoat Polymer Modified Cementitious Adhesive
Planitop Basecoat is a high-performance, polymer-modified, Portland-cement-based, pre-blended mortar for non-structural applications. Planitop Basecoat can be used as a base coat for embedding mesh in exterior insulation and finish systems (EIFS) or as a leveling coat on cement-based stucco before the application of an acrylic finish or waterproof coating.
-
MAPEI PLANITOP XS 50LB FAST SETTING
Planitop XS is an extended-working-time variation of Planitop X. Shrinkage-compensated, fiber-reinforced, polymer-modified and containing a corrosion inhibitor, Planitop XS features Planitop X ’s outstanding workability and versatility.
